by ccarpenter1 » Sun 19. Oct 2008, 14:33
I tried the file you provided. It did not work either. It was the only file that was used when IRTrans was started, so nothing would interfere with it. I tried several times using the GUI client to send including different LEDs, (internal, external, ALL, etc), and nothing seems to work. If I point the original remote to the XBOX360 (i'm about 8 feet away), it opens and closes the tray with no problem. Interestingly, when I look at "Detected IR Commands", IRTrans seems to see the detected command everytime I use the original remote. I opened the battery compartment on the original remote and noticed that it had a label on it saying RC6 IR. Lastly, everytime I send the command, I see the Red LED on the LAN Controller XL light up for a brief second.
This is a shot in the dark, but the LAN Controller XL has the capability to issue its own commands. How does the IRTrans Server know whether or not the XL Controller will be sending out the command directly via its internal database or the IR sequence will come from the IRTrans server software and transmitted via the LAN Controller XL?
I am really at a loss to figure this problem out.
Thanks,
Chuck
- Attachments
-
- IRtrans Detected XBOX.jpg (18.22 KiB) Viewed 49997 times