Error learning dreambox remote codes

Everything related to learning and capturing of IR Codes

Moderator: marcus

Error learning dreambox remote codes

Postby simples » Fri 16. Dec 2011, 13:52

We have: IRTrans POE DB, LAN version 1.11.00, IR version 6.08.23
while trying to learn codes from one and the same remote, we get different codes for the same button (in this case button 1). As such:
Code: Select all
[REMOTE]
  [NAME]example

[TIMING]
  [0][N]13[1]248 720[2]248 856[3]240 1256[4]216 1568[5]208 1728[6]216 1840[7]216 1976[8]240 2096[9]272 2616[10]240 2792[11]248 12960[12]216 13056[13]216 80280[RC]1[RP]0[FREQ]38
  [1][N]13[1]248 720[2]240 856[3]240 1256[4]296 1488[5]248 1688[6]240 1816[7]240 1952[8]264 2072[9]240 2656[10]264 2768[11]272 12928[12]240 13032[13]248 80248[RC]1[RP]0[FREQ]38
  [2][N]12[1]248 720[2]232 864[3]232 1264[4]256 1528[5]240 1696[6]248 1816[7]240 1952[8]248 2088[9]240 2648[10]240 2792[11]240 12968[12]232 80264[RC]1[RP]0[FREQ]38
  [3][N]13[1]240 736[2]240 864[3]216 1288[4]272 1512[5]232 1704[6]232 1824[7]240 1952[8]256 2080[9]232 2656[10]264 2768[11]240 12960[12]208 13064[13]256 80232[RC]1[RP]0[FREQ]38

[COMMANDS]
  [1_][T]0[D]08092217A09000100C08092217A04500100C08092217A04500100C08092217A04500100B08092217A036001000
  [1a][T]1[D]08092217A09000100C08092217A04500100C08092217A04500100C08092217A04400100B08092217A036001000
  [1b][T]2[D]08092217A09000100B08092217A04500100B08092217A04500100A08092217A036001000
  [1c][T]3[D]08092217A09000000C08092207A04500100C08092217A04400100C08092217A04500100C08092217A04400100B08092217A036001000


How can this happen and what are we doing wrong?
simples
 
Posts: 26
Joined: Mon 10. Oct 2011, 12:13

Re: Error learning dreambox remote codes

Postby IRTrans » Fri 16. Dec 2011, 15:12

Hi,
the IR Codes for the Dreambox are a bit strange.

The code changes if you press the button a bit longer. Anyways, the codes will work fine if you send them.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: Error learning dreambox remote codes

Postby simples » Sat 17. Dec 2011, 18:44

Hello,
thank you for the quick answer. But we need to translate this code and send it to network client, so we need to know all codes wich produced from each button. In this case how we can walk around this "bin strange"? May be some options like "Receive tolerance" or something else can help?
simples
 
Posts: 26
Joined: Mon 10. Oct 2011, 12:13

Re: Error learning dreambox remote codes

Postby IRTrans » Sat 17. Dec 2011, 19:29

Hi,
it might not be possible to translate these codes. It is not a problem of the tolerance. The problem is more that the codes change depending on how long you press the button.

The Dreambox remote is one of the few remotes where receiving / translating of the IR Codes will not be possible.

Please note that it is no problem to learn and send the codes.

You might try to learn a lot of different code for each button - however, you might need a lot of buttons.

Maybe a specific IR Receiver for short pulses might help here.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: Error learning dreambox remote codes

Postby simples » Mon 19. Dec 2011, 11:34

IRTrans wrote:Maybe a specific IR Receiver for short pulses might help here.
can you please explain what device is this and how to purchase it?
simples
 
Posts: 26
Joined: Mon 10. Oct 2011, 12:13

Re: Error learning dreambox remote codes

Postby IRTrans » Mon 19. Dec 2011, 13:35

It is a special IR Receiver that does receive IR Code with short pulses better than the standard receiver.

However, then the problem with the different codes depending on how long you press the button remains.

Furthermore you will need an IRTrans device with a connector for an external receiver.

You can order the receiver via Email.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32


Return to Learning of IR Codes

Who is online

Users browsing this forum: No registered users and 0 guests

cron