by agbnielsen » Mon 7. Mar 2011, 22:16
It is sent via one ini file and one "sequence" file for each Set Top Box with the port selected (LED Meter_X=). The sequence file corresponds to the Channel IDx a.k.a Channel number.
See below...
Note: Remote Meter 1 "Fox" is on a separate PC. On the PC with the FTA and Optimus STB, the application for Fox is not running. So, the codes for Fox are not sent with this IR Trans. It is sent with the Ethernet v2.2. Both PCs are on the same LAN. The sequence file is the same (see below) the ini file is slightly different.
INI file for Meter 1
[Settings]
Log_File_Path="c:\Program Files\IR system\Output"
Seq_File_Path="c:\Program Files\IR system\Seq"
Nbr_Meters="3"
Remote_Meter1="Fox"
LED_Meter1=2
Remote_Meter2="FTA"
LED_Meter2=3
Remote_Meter3="Optimus"
LED_Meter3=9
To="itsupport@some_domain.com."
To_Info="itadmin@some_domain.com.au"
From="unit@some_domain.com.au"
Server="192.168.1.2"
Delay_Per_Meter = 5
Multiport="false"
[Network]
IRTrans_IP="192.168.1.131"
[Meter_1]
Channel_Idx=5001,5002,5003,5004,5005,5006,5007,5008,5009,5010,5012,5013,5014,5015,5016,5017
[Meter_2]
Channel_Idx=1068,10187,10661,1016,1025,10171,10233,10201,10183,1021,10181,1027,1029,1032,1030,10204,1031,1063,10231,10173,1510,1024
[Meter_3]
Channel_Idx=5148,5149,5150
INI file for Meter 2 & 3
[Settings]
Log_File_Path="c:\Program Files\IR system\Output"
Seq_File_Path="c:\Program Files\IR system\Seq"
Nbr_Meters="3"
Remote_Meter1="Fox"
LED_Meter1=7
Remote_Meter2="FTA"
LED_Meter2=3
Remote_Meter3="Optimus"
LED_Meter3=1
To="itsupport@some_domain.com."
To_Info="itadmin@some_domain.com.au"
From="unit@some_domain.com.au"
Server="192.168.1.2"
Delay_Per_Meter = 5
Multiport="true"
[Network]
IRTrans_IP="192.168.1.27"
[Meter_1]
Channel_Idx=5001,5002,5003,5004,5005,5006,5007,5008,5009,5010,5012,5013,5014,5015,5016,5017
[Meter_2]
Channel_Idx=1068,10187,10661,1016,1025,10171,10233,10201,10183,1021,10181,1027,1029,1032,1030,10204,1031,1063,10231,10173,1510,1024
[Meter_3]
Channel_Idx=5148,5149,5150,5047
Sequence File for Meter 1
[Channels]
5001="101,Ch1 "
5002="401,Ch 2"
5003="701,Ch 3"
5004="103,Ch 4"
5005="608,Ch 5"
5006="108,Ch 6"
5007="501,Ch 7"
5008="610,Ch 8"
5009="801,Ch 9"
etc...
Sequence file for Meter 2
[Channels]
1068="011,Ch 1"
10187="034,Ch 2"
10661="023,Ch 3"
1016="010,Ch 4"
1025="030,Ch 5"
etc...
Sequence file for Meter 3
[Channels]
5148="935,Ch1"
5149="937,Ch 2"
5150="936,Ch 3"
5047="134,Ch 4"
Cheers,