I have both VF210 and IR221 installed in my case. My intention is to use IR221 as IR receiver and VF210 as Vista Media Center VFD.
The problem is that although I can control Vista Media Center with my remote, the VFD always displays "Welcome to HTPC" (no show information, DVD chapter, etc.)
I positioned the switch on the VF210 to "Philips" and I installed the IRTrans USB drivers (the IRTrans device was found at the first boot) and the MCE Display Driver. I did not install the IRServer per Origenae instruction.
Is there anything else that I should do to see the Vista Media Center information on the VFD?
Thanks!