Page 1 of 1

DM500HD[Dreamelite] GreenButton-long-push

PostPosted: Sun 15. May 2011, 13:09
by Look_as
Hi,

I have a dreambox 500 hd with dreamelite firmware. I want to learn a new GreenButton-long-push command to open subservice channel in dreambox.

Device:
IRTrans LAN : IR VER: E6.04.51 ETH VER: L1.07.50

Software:
IRServer Version 6.03.09
IRTrans GUI Client Version 7.0.29.25267

I tried to learn the ir command with "Lange FB drucke lernen" option on (see learn.jpg), but it doesnt works.
If i press the button like 1-2 secs it will make a NUL command in the rem file. If i press the GreenButton once it will do a normal GreenButton command (see test.rem).

Please kindly advise me in this problem.

Thank you in advance

Look_as

Re: DM500HD[Dreamelite] GreenButton-long-push

PostPosted: Mon 16. May 2011, 11:10
by IRTrans
Hi,
we will need to test that ourselfs.

IRTrans

Re: DM500HD[Dreamelite] GreenButton-long-push

PostPosted: Fri 27. May 2011, 00:50
by IRTrans
Hi,
those long codes cannot be learned at the moment due to memory restrictions.

We can, however, supply you a firmware update that will allow sending those codes. We can also provide a .rem file for the Dreambox with long presses for the red, green, yellow and blue buttons. In case you need any more long presses please let us know.

Learning will also be fixed in future firmware releases.

Please contact us via Email (info@irtrans.de) for the firmware update.

IRTrans