CCF converted codes do not work

Everything related to learning and capturing of IR Codes

Moderator: marcus

CCF converted codes do not work

Postby trinidex » Mon 5. Jul 2010, 15:17

IRServer Version 5.11.08
[ 0]: IRTrans LAN: IR VER: E5.11.10
ETH VER: L1.06.26

Used CCF Extractor to convert a CCF file - process worked perfectly, saved to irTrans okay.

Rebuild database - OK
Send Command - remote and commands are shown.

Sending commands fail - no response for irTrans unit (no LED blink) and device does not respond.

Thanks for assistance.
trinidex
 
Posts: 18
Joined: Mon 8. Feb 2010, 23:31

Re: CCF converted codes do not work

Postby IRTrans » Mon 5. Jul 2010, 15:21

Hi,
no idea what the problem is. We would need to see the .rem file to tell you more.

Maybe these are CCF codes for a different Pronto remote using a different format.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: CCF converted codes do not work

Postby trinidex » Mon 5. Jul 2010, 15:30

Thank you

I have attached the .rem file

dish.rem
Converted CCF file
(2.09 KiB) Downloaded 2534 times
trinidex
 
Posts: 18
Joined: Mon 8. Feb 2010, 23:31

Re: CCF converted codes do not work

Postby IRTrans » Mon 5. Jul 2010, 17:35

Hi,
that is not a standard Pronto CCF Format that is supported by the IRTrans.

The IRTrans SW supports the original Pronto CCF/Hex Format used by the Standard Pronto remotes.

The normal Pronto codes never have "0000" in the first 4 blocks of the code. Only the first block should be "0000". You might try to remove the first 3 blocks.
It does look like a 56kHz code though.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: CCF converted codes do not work

Postby trinidex » Tue 6. Jul 2010, 01:45

Thank you I will try your suggestion and different codes.
trinidex
 
Posts: 18
Joined: Mon 8. Feb 2010, 23:31

Re: CCF converted codes do not work

Postby trinidex » Tue 6. Jul 2010, 13:49

I have new codes (attached) but they do not work consistently.

Are the codes valid or is there something else I'm missing?

Thanks
dish.rem
Dish Network codes
(1.48 KiB) Downloaded 2432 times
trinidex
 
Posts: 18
Joined: Mon 8. Feb 2010, 23:31

Re: CCF converted codes do not work

Postby IRTrans » Tue 6. Jul 2010, 13:52

No idea what to do. Without having the remote control there is no way for us to test or verify those codes.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: CCF converted codes do not work

Postby trinidex » Thu 8. Jul 2010, 00:15

It looks like the ‘LAN Controller XL’ CCF implementation is to blame here.

I have used the same CCF codes with a Crestron ST-CP and the codes work.

As a workaround I have resorted to connecting the ‘LAN Controller XL’ to the Crestron ST-CP using RS232, this way I send RS232 commands from the ‘LAN Controller XL’ to the Crestron ST-CP which sends the IR signals.

Not an ideal solution but I have achieved what I need.
trinidex
 
Posts: 18
Joined: Mon 8. Feb 2010, 23:31

Re: CCF converted codes do not work

Postby IRTrans » Fri 9. Jul 2010, 09:36

Well, the problem is that you are using a CCF version that is not supported by our SW.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32


Return to Learning of IR Codes

Who is online

Users browsing this forum: No registered users and 8 guests

cron