Can't control a fantec Mediaplayer.

[ThomasD]

Hallo,

My IR-Trans Sytem is operable and run fine.
Now i capture the Remote from the Mediaplayer Fantec TV-LHD.
IR-Trans recognition the command, but the Player do not respond.

Here the REM File:

Code: Select all

[REMOTE]
  [NAME]fantec HD Player

[TIMING]
  [0][N]0[RC]2[FL]107[FREQ]36[RC5]

[COMMANDS]
  [power][T]0[D]11010110000011


Update:
A nother attempt with RAW have a success, but way not the first try?.

Code: Select all

[REMOTE]
  [NAME]fantec raw

[TIMING]


[COMMANDS]
  [power][RAW]205[FREQ]38[D]792 888 792 880 792 880 1632 1720 792 888 1624 888 784 888 800 880 792 880 792 1720 792 888 792 0 328 688 784 888 792 888 784 888 1624 1728 792 880 1632 888 784 888 792 880 792 888 784 1728 784 888 800 0 328 680 800 880 792 880 792 888 1624 1728 784 888 1624 888 800 880 792 880 792 880 792 1728 784 888 792 0 328 688 784 888 792 888 792 880 1632 1720 792 888 1624 888 784 888 792 888 784 888 784 1728 800 880 792 0 328 688 792 880 792 888 784 888 1624 1728 784 888 1624 888 800 880 792 880 792 888 792 1720 784 888 792 0 328 688 792 888 784 888 800 880 1624 1728 784 888 1624 888 792 888 784 888 784 888 800 1720 792 880 792 0 328 688 792 880 792 888 792 880 1624 1728 784 896 1632 880 792 880 792 888 784 888 792 1720 792 888 784 0 328 696 792 880 792 888 792 880 1632 1720 784 888 1624 888 792 888 792 880 800 880 792 1720 792 880 856


regards
Thomas

[IRTrans]

Hi Thomas,
it looks like your device uses an RC5 code but without toggle bit. The IRTrans can, of course, not know that this is a non-standard RC5 code.

However, no problem, simply use the RAW codes and everything is fine.

IRTrans

[ThomasD]

Hello,

i have test other funktion of the Device, the Problem ist ony the Power Bottom, after the device is power on with the Raw Code it works with standart
RC5 code like this:

Code: Select all

[REMOTE]
  [NAME]fantec HD Player

[TIMING]
  [0][N]0[RC]2[FL]107[FREQ]36[RC5]

[COMMANDS]
  [3][T]0[D]11010110100010
  [4][T]0[D]11010110100011
  [setup][T]0[D]11010110001000
  [down][T]0[D]11010110010101
  [up][T]0[D]11010110000101
  [left][T]0[D]11010110001100
  [right][T]0[D]11010110001110
  [ok][T]0[D]11010110001101
  [power][RAW]205[FREQ]38[D]792 888 792 880 792 880 1632 1720 792 888 1624 888 784 888 800 880 792 880 792 1720 792 888 792 0 328 688 784 888 792 888 784 888 1624 1728 792 880 1632 888 784 888 792 880 792 888 784 1728 784 888 800 0 328 680 800 880 792 880 792 888 1624 1728 784 888 1624 888 800 880 792 880 792 880 792 1728 784 888 792 0 328 688 784 888 792 888 792 880 1632 1720 792 888 1624 888 784 888 792 888 784 888 784 1728 800 880 792 0 328 688 792 880 792 888 784 888 1624 1728 784 888 1624 888 800 880 792 880 792 888 792 1720 784 888 792 0 328 688 792 888 784 888 800 880 1624 1728 784 888 1624 888 792 888 784 888 784 888 800 1720 792 880 792 0 328 688 792 880 792 888 792 880 1624 1728 784 896 1632 880 792 880 792 888 784 888 792 1720 792 888 784 0 328 696 792 880 792 888 792 880 1632 1720 784 888 1624 888 792 888 792 880 800 880 792 1720 792 880 856
  [lang][T]0[D]11010110001001


regards
Thomas