Page 2 of 2

Re: Learn IR codes with timing and RAW codes

PostPosted: Wed 25. Jul 2012, 13:33
by IRTrans
Very strange - according to the log file you are learning a repeat code.

Could you please check the versions of:

IRTrans.LearnIR.dll
IRTrans.NET.dll

They are both in the IRTrans SW folder. Simply right-click - Properties on the file.

Furthermore could you please post some screenshots of the learning process?

IRTrans

Re: Learn IR codes with timing and RAW codes

PostPosted: Thu 26. Jul 2012, 10:05
by azauhar
IRTrans.LearnIR.dll - file version: 1.0.15.0
- assembly version: 1.0.15.29680

IRTrans.NET.dll - file version: 4.0.40.29686
- assembly version: 4.0.40.29686

Re: Learn IR codes with timing and RAW codes

PostPosted: Thu 26. Jul 2012, 13:06
by IRTrans
Very, very strange.

Could you please send me a screenshot with all options available in the Learn Mode Combo box (the one with RAW Mode ...).

IRTrans

Re: Learn IR codes with timing and RAW codes

PostPosted: Thu 26. Jul 2012, 13:48
by azauhar
Here it is.

Re: Learn IR codes with timing and RAW codes

PostPosted: Thu 26. Jul 2012, 23:47
by IRTrans
OK, now I at least know what is happening - I only do not know why. We will investigate that.

IRTrans

Re: Learn IR codes with timing and RAW codes

PostPosted: Fri 27. Jul 2012, 08:46
by azauhar
I am glad I could help.

Re: Learn IR codes with timing and RAW codes

PostPosted: Fri 27. Jul 2012, 12:53
by IRTrans
Got it.

It was no error in the programm itself - just the English Translation of the Contents of the Combo Box was out of order.

Attached you find a corrected translation file. Please copy it to your IRTrans SW installation folder.

IRTrans

Re: Learn IR codes with timing and RAW codes

PostPosted: Mon 30. Jul 2012, 11:55
by azauhar
In the attachment is the screenshot of options that I now have. Why I do not have "Normal mode" any more, instead of that it is "Learn command with timing". RAW codes are now recorded correctly but for "Learn command with timing" it records codes in normal mode. I attached the example od learning commands with timing in attachment. Thank you very much!

Re: Learn IR codes with timing and RAW codes

PostPosted: Mon 30. Jul 2012, 12:53
by IRTrans
Hi,
"Normal mode" is no longer needed. It has been removed 2 years ago. You did not have normal mode anyways - just the Combo Box claimed it is "Normal mode". All IR Codes you learned so far using normal mode have been learned as "IR Code with timing".

Anyways, don't worry about that - that is just the way it should be.

IRTrans