Page 2 of 2

Re: Motorola 1963 Box Kpn learning Problem including .rem fi

PostPosted: Fri 9. Nov 2012, 21:12
by marko
Hi i have the same problem with my motorola from kpn.
the only difference is that I have the irtrans usb.

I hope there is solution for this problem.
greets marko

Re: Motorola 1963 Box Kpn learning Problem including .rem fi

PostPosted: Sat 10. Nov 2012, 12:06
by IRTrans
The IRTrans USB does not have a connector for an external IR Receiver. Therefore you have no chance to learn those codes with your device.

IRTrans

Re: Motorola 1963 Box Kpn learning Problem including .rem fi

PostPosted: Sun 11. Nov 2012, 17:38
by marko
So i have to buy the IRT-LAN-Mod with the COD-RCV in order to make it work??

Or is there a another way to make it work. Because now i will have a irtrans-ubs where i have nog use for.

greets marko

Re: Motorola 1963 Box Kpn learning Problem including .rem fi

PostPosted: Sun 11. Nov 2012, 18:34
by IRTrans
You might search the Internet for Pronto CCF Codes for your STB. That codes can also be used with the IRTrans.

IRTrans

Re: Motorola 1963 Box Kpn learning Problem including .rem fi

PostPosted: Sun 11. Nov 2012, 18:38
by IRTrans
I just found a .rem file for a Motorola STB in our archive.

No idea if it is the right one for your STB.

IRTrans

Re: Motorola 1963 Box Kpn learning Problem including .rem fi

PostPosted: Sat 24. Nov 2012, 13:41
by marko
Thanks for the help. It's the correct file.
I hade a little trouble to let it work white homeseer but its working now.

thanks for the help en the fast reply