After learned IR command nothing happens

Everything related to learning and capturing of IR Codes

Moderator: marcus

After learned IR command nothing happens

Postby mcb84 » Wed 1. Feb 2012, 08:28

After setting up a new remote in "Learn IR command" nothing appears in "Detected IR commands or the IR2keyboard program. IRtrans appears to have learned the button presses as a code popped up then a button was pressed in "learn ir command" and it saved it to a file. Im using windows 7 ultimate and here is the .rem file:

[REMOTE]
[NAME]origen

[TIMING]
[0][N]0[RC]2[RP]67[FREQ]36[RC6][SB][RS]

[COMMANDS]
[power][T]0[D]S11101010000000000011110000010000001100
[play][T]0[D]S11101010000000000011110000010000010110
[ok][T]0[D]S11101010000000000011110000010000100010
[mute][T]0[D]S11101010000000000011110000010000001110
[up][T]0[D]S11101010000000000011110000010000011110
[down][T]0[D]S11101010000000000011110000010000011111
[right][T]0[D]S11101010000000000011110000010000100001
[left][T]0[D]S11101010000000000011110000010000100000
mcb84
 
Posts: 8
Joined: Fri 27. Jan 2012, 21:16

Re: After learned IR command nothing happens

Postby IRTrans » Wed 1. Feb 2012, 13:30

Maybe the IR Receiver is disabled in the device settings.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: After learned IR command nothing happens

Postby mcb84 » Wed 1. Feb 2012, 18:43

Im seeing no option to enable\disable IR receiver in any of the irtrans software.
mcb84
 
Posts: 8
Joined: Fri 27. Jan 2012, 21:16

Re: After learned IR command nothing happens

Postby IRTrans » Wed 1. Feb 2012, 19:04

Depending on your firmware version it might be in the Device Settings of the GUI Client.

However, as we do not know those OEM device we cannot help you here in detail.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: After learned IR command nothing happens

Postby mcb84 » Wed 1. Feb 2012, 19:31

Its a VF110 model and there is no "device settings" anywhere to be found in the software ive been through every menu trying to get this thing to work. The version i installed was ir_trans_v09.10.09. The problem isn't the OEM hardware its your software and how its interacting with it.
mcb84
 
Posts: 8
Joined: Fri 27. Jan 2012, 21:16

Re: After learned IR command nothing happens

Postby mcb84 » Wed 1. Feb 2012, 19:43

There are two boxes in "device status" called "ir send" and "ir receive" and both are checked if thats what you mean. The problem still remands.
mcb84
 
Posts: 8
Joined: Fri 27. Jan 2012, 21:16

Re: After learned IR command nothing happens

Postby IRTrans » Wed 1. Feb 2012, 23:35

No idea what causes that.

Please note that the shown options and function of the devices not only have to do with the software but there is a very close relationship with HW and Firmware.

The firmware used by those OEM devices is several years old and we can no longer support it. Furthermore, as OrigenAE does no longer use our devices all the current SW for these devices is provided as is.

Please note that support for the OEM devices is in general only done through the HW vendor.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32


Return to Learning of IR Codes

Who is online

Users browsing this forum: No registered users and 4 guests