KDG HD DVR Remote Control
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Hi,
i tried to learn the codes of the KDG Remote control that is shipped as part of their 4 tuner hd dvr.
i'm using a standard IRTRans USB V3.8 with Firmware U6.06.30
The problem is, that even if i only try to learn one button, i get tons of different timings and codes (see rem extract below - always pressed ok).
From trying out the commands i found that the only correct one is the timing with RCMM detected - 2.
Why is this only detected a few (4) times? what do i need to set have better results (RCMM detection is activated in gui client)
BR
Michael
[REMOTE]
[NAME]test
[TIMING]
[0][N]4[1]352 2944[2]152 1400[3]152 2008[4]152 3344[RC]1[RP]0[FREQ]36[SB]
[1][N]5[1]144 464[2]152 624[3]144 792[4]352 1560[5]152 1960[RC]1[RP]0[FREQ]38
[2][N]5[1]168 280[2]168 440[3]416 280[4]168 608[5]168 776[RC]2[FL]100[FREQ]36[RCMM]
[3][N]7[1]144 464[2]144 632[3]144 792[4]152 1072[5]152 1240[6]352 1560[7]152 2568[RC]1[RP]0[FREQ]38
[4][N]6[1]152 464[2]144 632[3]152 792[4]152 1240[5]352 1552[6]144 1960[RC]1[RP]0[FREQ]38
[5][N]7[1]208 240[2]152 464[3]144 632[4]144 792[5]144 1240[6]144 1968[7]352 2168[RC]1[RP]0[FREQ]38
[6][N]6[1]200 248[2]200 408[3]152 624[4]168 776[5]160 1392[6]360 2160[RC]1[RP]0[FREQ]38
[7][N]6[1]144 464[2]144 632[3]152 792[4]152 1400[5]144 1968[6]352 2168[RC]1[RP]0[FREQ]38
[8][N]8[1]144 296[2]144 464[3]144 632[4]152 736[5]144 1072[6]144 1248[7]144 1408[8]352 1560[RC]1[RP]0[FREQ]38
[9][N]7[1]144 296[2]144 464[3]152 624[4]152 792[5]352 784[6]144 1072[7]144 1240[RC]1[RP]0[FREQ]38
[10][N]6[1]136 472[2]152 624[3]152 792[4]152 1176[5]144 1408[6]352 2168[RC]1[RP]0[FREQ]38
[11][N]7[1]160 456[2]152 624[3]152 736[4]144 1072[5]144 1240[6]144 1408[7]352 1560[RC]1[RP]0[FREQ]38
[12][N]5[1]144 464[2]152 624[3]144 800[4]152 1064[5]352 2168[RC]1[RP]0[FREQ]38
[13][N]6[1]144 304[2]144 464[3]144 632[4]152 792[5]144 1520[6]352 1560[RC]1[RP]0[FREQ]38
[14][N]6[1]192 280[2]152 456[3]144 632[4]152 792[5]144 1960[6]352 2168[RC]1[RP]0[FREQ]38
[15][N]5[1]144 464[2]144 792[3]144 1248[4]352 1560[5]144 1968[RC]1[RP]0[FREQ]38
[16][N]5[1]144 464[2]144 632[3]152 792[4]352 1560[5]144 2568[RC]1[RP]0[FREQ]38
[17][N]6[1]152 464[2]152 624[3]152 792[4]144 1240[5]352 1552[6]144 2568[RC]1[RP]0[FREQ]38
[18][N]6[1]144 464[2]152 624[3]144 792[4]352 1560[5]152 1848[6]152 1960[RC]1[RP]0[FREQ]38
[COMMANDS]
[ok][T]0[D]310152401420
[a][T]1[D]301024010020
[b][T]2[D]203131400031311400
[c][T]3[D]504261320
[d][T]2[D]203131400031311400
[e][T]4[D]40102503020
[f][T]2[D]203131400031311400
[g][T]5[D]62135411300
[h][T]6[D]52400021211300
[i][T]7[D]5134010020
[j][T]8[D]71260325430
[k][T]9[D]42613032125300
[l][T]10[D]5143130020
[n][T]12[D]410223010020
[m][T]1[D]301024010020
[o][T]13[D]5121304121130
[p][T]14[D]521341211300
[q][T]15[D]3021402010
[r][T]2[D]203131400031311400
[s][T]16[D]30102410020
[t][T]17[D]4032510020
[u][T]4[D]40102503020
[v][T]18[D]3425010020
[w][T]1[D]301024010020
i tried to learn the codes of the KDG Remote control that is shipped as part of their 4 tuner hd dvr.
i'm using a standard IRTRans USB V3.8 with Firmware U6.06.30
The problem is, that even if i only try to learn one button, i get tons of different timings and codes (see rem extract below - always pressed ok).
From trying out the commands i found that the only correct one is the timing with RCMM detected - 2.
Why is this only detected a few (4) times? what do i need to set have better results (RCMM detection is activated in gui client)
BR
Michael
[REMOTE]
[NAME]test
[TIMING]
[0][N]4[1]352 2944[2]152 1400[3]152 2008[4]152 3344[RC]1[RP]0[FREQ]36[SB]
[1][N]5[1]144 464[2]152 624[3]144 792[4]352 1560[5]152 1960[RC]1[RP]0[FREQ]38
[2][N]5[1]168 280[2]168 440[3]416 280[4]168 608[5]168 776[RC]2[FL]100[FREQ]36[RCMM]
[3][N]7[1]144 464[2]144 632[3]144 792[4]152 1072[5]152 1240[6]352 1560[7]152 2568[RC]1[RP]0[FREQ]38
[4][N]6[1]152 464[2]144 632[3]152 792[4]152 1240[5]352 1552[6]144 1960[RC]1[RP]0[FREQ]38
[5][N]7[1]208 240[2]152 464[3]144 632[4]144 792[5]144 1240[6]144 1968[7]352 2168[RC]1[RP]0[FREQ]38
[6][N]6[1]200 248[2]200 408[3]152 624[4]168 776[5]160 1392[6]360 2160[RC]1[RP]0[FREQ]38
[7][N]6[1]144 464[2]144 632[3]152 792[4]152 1400[5]144 1968[6]352 2168[RC]1[RP]0[FREQ]38
[8][N]8[1]144 296[2]144 464[3]144 632[4]152 736[5]144 1072[6]144 1248[7]144 1408[8]352 1560[RC]1[RP]0[FREQ]38
[9][N]7[1]144 296[2]144 464[3]152 624[4]152 792[5]352 784[6]144 1072[7]144 1240[RC]1[RP]0[FREQ]38
[10][N]6[1]136 472[2]152 624[3]152 792[4]152 1176[5]144 1408[6]352 2168[RC]1[RP]0[FREQ]38
[11][N]7[1]160 456[2]152 624[3]152 736[4]144 1072[5]144 1240[6]144 1408[7]352 1560[RC]1[RP]0[FREQ]38
[12][N]5[1]144 464[2]152 624[3]144 800[4]152 1064[5]352 2168[RC]1[RP]0[FREQ]38
[13][N]6[1]144 304[2]144 464[3]144 632[4]152 792[5]144 1520[6]352 1560[RC]1[RP]0[FREQ]38
[14][N]6[1]192 280[2]152 456[3]144 632[4]152 792[5]144 1960[6]352 2168[RC]1[RP]0[FREQ]38
[15][N]5[1]144 464[2]144 792[3]144 1248[4]352 1560[5]144 1968[RC]1[RP]0[FREQ]38
[16][N]5[1]144 464[2]144 632[3]152 792[4]352 1560[5]144 2568[RC]1[RP]0[FREQ]38
[17][N]6[1]152 464[2]152 624[3]152 792[4]144 1240[5]352 1552[6]144 2568[RC]1[RP]0[FREQ]38
[18][N]6[1]144 464[2]152 624[3]144 792[4]352 1560[5]152 1848[6]152 1960[RC]1[RP]0[FREQ]38
[COMMANDS]
[ok][T]0[D]310152401420
[a][T]1[D]301024010020
[b][T]2[D]203131400031311400
[c][T]3[D]504261320
[d][T]2[D]203131400031311400
[e][T]4[D]40102503020
[f][T]2[D]203131400031311400
[g][T]5[D]62135411300
[h][T]6[D]52400021211300
[i][T]7[D]5134010020
[j][T]8[D]71260325430
[k][T]9[D]42613032125300
[l][T]10[D]5143130020
[n][T]12[D]410223010020
[m][T]1[D]301024010020
[o][T]13[D]5121304121130
[p][T]14[D]521341211300
[q][T]15[D]3021402010
[r][T]2[D]203131400031311400
[s][T]16[D]30102410020
[t][T]17[D]4032510020
[u][T]4[D]40102503020
[v][T]18[D]3425010020
[w][T]1[D]301024010020