irw can't connect to irtrans
Posted: Mon 26. Apr 2010, 02:26
I have a new itrans Ethernet working. When I start the irserver my log shows:
I now want to see what IR codes are received, so I tried to run IRW but I get:
because there is no /var/run/lirc/lircd socket file.
Can someone tell me how to get irw to work with irtrans?
Thanks
- Code: Select all
2010-04-25 21:59:25.401 Init Server Socket done
2010-04-25 21:59:25.401 Init Events done
2010-04-25 21:59:25.442 Name : IRTrans LAN
2010-04-25 21:59:25.442 Version: E6.04.51
2010-04-25 21:59:25.442 FW SNo : 45965
2010-04-25 21:59:25.442 Capab : Power On; Dual Transmitter Drivers; 128KB IR Flash;
2010-04-25 21:59:25.442 FW Cap : 0x1186171
2010-04-25 21:59:25.442 FW Cap2: 0xc95a1c63
2010-04-25 21:59:25.442 USB SNo: 00-22-3e-07-00-60
2010-04-25 21:59:25.442 Node : 172.31.254.14
2010-04-25 21:59:25.442 Init communication ...
2010-04-25 21:59:25.443 IRServer Version 6.02.43
2010-04-25 21:59:25.443 [ 0]: IRTrans LAN: IR VER: E6.04.51 ETH VER: L1.07.56 SN: 45965
MAC:00-22-3e-07-00-60 IP Addr: 172.31.254.14
2010-04-25 21:59:25.443 Chdir to DB OK
2010-04-25 21:59:25.461 Read routing OK
2010-04-25 21:59:25.461 Read Switches OK
2010-04-25 21:59:25.461 Open DIR: 0
2010-04-25 21:59:25.461 Get Dirent: 84
2010-04-25 21:59:25.491 Remote automation compiled:2010-04-25 21:59:25.491 1 Timings - 2010-04-25 21:59:25.491 11 Commands
2010-04-25 21:59:25.492 Remote mythtv compiled:2010-04-25 21:59:25.492 1 Timings - 2010-04-25 21:59:25.492 42 Commands
2010-04-25 21:59:25.492 Get Dirent: 0
2010-04-25 21:59:25.492 Total: 2 Remotes - 2 Timings - 53 Commands - 0 Calib. Commands
2010-04-25 21:59:25.492 0 Togglec. - 0 CCF Data - 0 CCF RAW - 0 CCF Error
2010-04-25 22:18:08.118 IRTRANS TCP/IP Socket connection request
2010-04-25 22:18:08.118 IRTRANS TCP/IP Client 0 accepted from 127.0.0.1
2010-04-25 22:18:14.514 Netcommand Size: 112/112
2010-04-25 22:18:14.514 Netcommand: 69 [0]
2010-04-25 22:18:14.544 Send Status 31764 - 31764 [24]
2010-04-25 22:18:33.954 Client [0] disconnect
I now want to see what IR codes are received, so I tried to run IRW but I get:
connect: No such file or directory
because there is no /var/run/lirc/lircd socket file.
Can someone tell me how to get irw to work with irtrans?
Thanks