Hi,
I have an IRTrans USB V3.3 and I'm using the current server/client available on your website. Below is what happens when I try to get the status from the device:
---
IRTrans ASCII Client Version 6.01.01
1 - Send
2 - Learn
3 - Status
99 - Exit
Select command 3
0 Device(s) Found:
---
]The irserver log shows the following:
---
IRTRANS TCP/IP Socket connection request
IRTRANS TCP/IP Client 0 accepted from 127.0.0.1
Netcommand: 69 [0]
Send Status 31764 - 31764 [24]
---
The client frequently segmentation faults but I can still learn codes and use the device, but I think the firmware is VERY out of date. I know I haven't updated it at least since I got the driver accepted into the Linux kernel years ago.
I also don't see an option to learn repeat codes in the Linux client. All I have is:
---
1 - Select remote
2 - Learn Timing
3 - Learn Command [Based on timing]
4 - Learn Command [Command with timing]
5 - Learn Command [RAW Data]
99 - Exit
---
I look forward to getting this working properly again. Thanks in advance.
Regards,
Michal Dobrzynski
P.S. I am running this under Ubuntu 9.04 and the device ID for my IRTrans is as follows:
Bus 003 Device 002: ID 0403:fc60 Future Technology Devices International, Ltd