by IRTrans » Fri 2. Apr 2010, 20:29
Hi,
if the codes are unstable the problem might be that the remote which makes problems has got different carrier frequency.
It is technically not possible to relay IR codes with different carrier frequency with a decoding device like the IRTrans.
Also there are some remote controls that use codes that are difficult or impossible to relay because they use very short pulses.
Mostly you can learn and send those codes but you cannot relay them.
The only thing you might do would be to use a different remote control and translate those codes into the needed format.
To do that you would need to have IRTrans devices with IRDB. Furthermore you will need to learn the problematic codes somehow.
That could be done using a Codelearning receiver, however that is not supported by the V 1.2 IRTrans device.
IRTrans