I would like to test the largest "IRTrans Device Status Dialog". It may be useful for me. For example, with this new firmware, can I use an external IR Receiver without removing the red jumper ?
I give you all versions I've found :
IRSERVER Version 5.12.08
IRTRANS LAN : IR VER : E5.11.10 ETH VER : L1.06.26
As this is only a firmware change there will be no hardware changes - that means of course you still need to remove the red jumper to use an external receiver.
In general we do not advise to make firmware updates without having problems.
If you still want to have a firmware update please contact us via Email.