IRTrans Support Forum

by **Santosh** » Wed 13. Jul 2011, 06:20

My application is accessing Set Top Box (STB) via http request using IRTRANS. All the keyes are working fine. Now I got a new request to handle the situation of keep holding a particular key for some time. How to handle this scenario? Please help.

To send a key to STB my application uses the below URL.
http://192.168.0.32:80/send.htm?remote= ... d=external

moto is the database name/ remote name
RC_DOWNARRAOW is name of the key.

This request results in STB to process one down arrow key.

New requirement says keep pressed the down arrow for say 20 second.

If I hold the key down arrow pressed manully on remote. STB starts responding like the key is pressed multiple times.

by **IRTrans** » Wed 13. Jul 2011, 11:08

Hi,
20s is a VERY long time.

With the GUI Client you can learn long key presses with the special option for that. That will work for up to around 4-5s.

Which firmware version does your IRTrans device have?

IRTrans

by **Santosh** » Wed 13. Jul 2011, 12:50

It seems the firmware version is 1.4.0.3

: About.JPG; About.JPG (14.34 KiB) Viewed 33325 times

Although the PDFs file present in documentation having version 3.8

by **IRTrans** » Wed 13. Jul 2011, 13:04

Hi,
that is only the SW version of the taskbar wrapper.

You can see the versions if you open the diagnostics window of the IR Server (IR Icon).

IRTrans

by **Santosh** » Wed 13. Jul 2011, 13:11

IRServer Version 6.02.30
[ 0]: IRTrans LAN: IR VER: E6.04.40 ETH VER: L1.07.32 SN: 44007
MAC:00-22-3e-08-00-7c IP Addr: 192.168.0.32

IRTrans Support Forum

How to handle the press and hold a key?

How to handle the press and hold a key?

Re: How to handle the press and hold a key?

Re: How to handle the press and hold a key?

Re: How to handle the press and hold a key?

Re: How to handle the press and hold a key?

Who is online