LAN Controller Xl and selecting External IR Port

[ontrack2]

We have received a Lan Controller XL to see if it suites our needs.

We have approximately 200 Set Top Boxes all using the same remote control.
We need to be able to control each device individually.

I have been reading through the doco and cant seem to find where or how to control which external IR port to send a command through? It seems to send the command through all 8 ports.

For example if we send teh power off command, it send it to all 8 boxes, and thus turns all 8 boxes off. We want to be able to only send it to the port we specifiy.

thanks

Rob

[IRTrans]

Hi,
all clients or APIs have got an option to select an IR output. You can find this information in the
IRTrans Ethernet / LAN Controller manual.

If you tell us which API or client you are using we can, of course, tell you the correct parameters to use.

IRTrans