pb with sending IR commands

Software related support

Moderator: marcus

pb with sending IR commands

Postby choco95 » Mon 6. Jul 2009, 16:19

I have IrTran Mediacontroller (RS232)
I want to order by RS232, with the command
snd <remode>, <command> + Chr $ (13)
(snd marantz,on/off + Chr $ (13)
in VB6 on com1
Everything works with irtranstray but not when I send the sequence as indicated

thanks
choco95
 
Posts: 3
Joined: Mon 6. Jul 2009, 16:15

Re: pb with sending IR commands

Postby IRTrans » Mon 6. Jul 2009, 19:52

Hi,
you will need to upload your remote controls first using the GUI Client (Device Database):

- Open Device Database in the GUI Client
- Select the remotes you want to upload (Right Mouseclick-Select)
- Click on "Flash" to upload the codes

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: pb with sending IR commands

Postby choco95 » Tue 7. Jul 2009, 11:15

ok, it works fine

thank you
choco95
 
Posts: 3
Joined: Mon 6. Jul 2009, 16:15

Re: pb with sending IR commands

Postby choco95 » Fri 10. Jul 2009, 09:59

hello,

I need to down a screen
in a home cinema to make a
ir command lasts 7s (the time that the screen is lowered)
how do?

thank you
choco95
 
Posts: 3
Joined: Mon 6. Jul 2009, 16:15

Re: pb with sending IR commands

Postby IRTrans » Fri 10. Jul 2009, 10:58

Sending a 7s code is not possible. You can only try to make a macro that sends the IR code several times.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32


Return to Software

Who is online

Users browsing this forum: No registered users and 14 guests

cron