Pronto Hex Convert

Software related support

Moderator: marcus

Pronto Hex Convert

Postby Chak » Sun 31. May 2009, 12:40

Hi all,
Search did not deliver the tool that I'm looking for.

I have lot of pronto Hex codes that I like to convert to Irtrans (Homeseer)

How can I do that?

example of this code
Humax PVR Power on

0000 006d 0000 0022 0150 00a8 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0666
Chak
 
Posts: 1
Joined: Sun 31. May 2009, 12:32

Re: Pronto Hex Convert

Postby IRTrans » Sun 31. May 2009, 18:19

You can enter the codes into a .rem file. The format is described in the IRTrans manual.

With homeseer that is a bit complicated as the codes need to learned through Homeseer so that HS knows the codes.
That means you will need to learn e.g. a dummy code through Homeseer and then replace this code with the CCF code.
In most cases it will be easier to learn the IR Codes directly, though.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: Pronto Hex Convert

Postby bluesincenew » Fri 24. Jul 2009, 19:07

I am able to see the remote title in IRClient but there are no commands listed. IRTranstray "send command" lists the remote and the commands but returns the following error on attempt. "IR Error: Specified remote command ['command name'] not found."

I have tested a few of the ccf codes by learning them in IRClient. Is there something incorrect in the following format?

[REMOTE]
[NAME]Int Zone 2

[COMMANDS]
[Standby] [ccf]0000 006D 0022 0002 0156 00AB 0015 0015 0015 003F 0015 0015 0015 0015 0015 003F 0015 0015 0015 003F 0015 003F 0015 0015 0015 003F 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 003F 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 0015 0015 003F 0015 003F 0015 003F 0015 0015 0015 003F 0015 064B 0156 0055 0015 0E47
[Power On] [ccf]0000 006D 0022 0002 0156 00AB 0015 0015 0015 003F 0015 0015 0015 0015 0015 003F 0015 0015 0015 003F 0015 003F 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003F 0015 003F 0015 0015 0015 003F 0015 003F 0015 003F 0015 003F 0015 003F 0015 064B 0156 0055 0015 0E47


(I have only text values for the ccf codes I wish to use.)
bluesincenew
 
Posts: 12
Joined: Thu 11. Jun 2009, 00:57

Re: Pronto Hex Convert

Postby IRTrans » Fri 24. Jul 2009, 21:55

To check the format we need to have the file itself.

You can append the .rem file to your post.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: Pronto Hex Convert

Postby bluesincenew » Fri 24. Jul 2009, 22:10

The first command is the same from example ccf.rem. The file works with the sample command [V+] in place, thought the commands don't seem to translate properly. They flash, but have no effect. Remove the sample command and no commands are found.
Attachments
integra Zn2.rem
(18.24 KiB) Downloaded 939 times
bluesincenew
 
Posts: 12
Joined: Thu 11. Jun 2009, 00:57

Re: Pronto Hex Convert

Postby michaellee » Sat 26. Sep 2009, 01:11

I am having the same problem with this .rem file.

The command is not recognized by irclient.exe
Attachments
AKL-CCF.rem
(3.58 KiB) Downloaded 984 times
michaellee
 
Posts: 3
Joined: Tue 15. Jul 2008, 05:16

Re: Pronto Hex Convert

Postby chrisson » Wed 19. May 2010, 13:37

Hello,
No update since long time...have same issue.
Can someone check attached file ?
File format seems ok according documentation.
Thanks in advance for support.
Attachments
PioneerDVR520H-GGF1381.rem
(16 KiB) Downloaded 998 times
chrisson
 
Posts: 3
Joined: Wed 19. May 2010, 13:31

Re: Pronto Hex Convert

Postby IRTrans » Wed 19. May 2010, 18:02

What exactly is the problem you have ?

The file does look OK, however it is impossible for us to further check that without having the device.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: Pronto Hex Convert

Postby chrisson » Thu 20. May 2010, 06:29

Hello,
Thanks for the quick answer.
I fact, the IRTrans device (USB) seems not sending any data (the led blink correctly red). I put another IRTrans device (USB) in front of first one to check and nothing is received.
I confirm that the hardware is ok by learning and sending back some code from a strandart remote : hardware is ok.
I read also in this forum that some other parameter can be added at the end of the command line in CCF format : 2 comma, l2, ...Is there anything to do here or is there for another use or device ?
Thanks and best regards
Chris.
chrisson
 
Posts: 3
Joined: Wed 19. May 2010, 13:31

Re: Pronto Hex Convert

Postby IRTrans » Thu 20. May 2010, 10:50

Hi,
I had another look at your file. The carrier frequency defined in the file would be 63hz. As that does not make sense at all I suppose it is a Pronto code of some newer Pronto that we do not support. We do support the format of the RU-890, RU-940, RU-970, TS-1000, TSU-2000, TSU-6000, RC-5000, RC-5000i, RC-5200, RC-9200, RAV-2000, USR-5. We do not support Pronto NG and Pronto Neo Codes.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Next

Return to Software

Who is online

Users browsing this forum: No registered users and 8 guests

cron