IP Socket binding with IR Trans GUI Client

Software related support

Moderator: marcus

IP Socket binding with IR Trans GUI Client

Postby suraj221 » Fri 8. May 2009, 13:39

Hi,

I installed irTrans software for irTrans ethernet device. I powered the irTrans hardware device and connected the ethernet cable. I was able to start the irServer after assigning an IP address to it. I then started the GUI Client. However I am not able to send any commands nor learn any command using the IR Trans GUI Client. I get an error message "IR Error: Could not bind to IP socket(Another server running??)" everytime i click on Device status or send command on the GUI client.

Please help me fix this issue

Note: I was able to detect the IR commands that I sent using a Remote on irServer.

Regards,
Suraj
suraj221
 
Posts: 1
Joined: Fri 8. May 2009, 13:30

Re: IP Socket binding with IR Trans GUI Client

Postby IRTrans » Fri 8. May 2009, 14:23

What programm is giving you this error message ?

Either you messed up the starting order of the software or you have some sort of problem with the IP configuration on your PC.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32


Return to Software

Who is online

Users browsing this forum: No registered users and 8 guests

cron