CommandFusion

[clmuller]

Hi, is it possible to use irtrans with CommandFusion software?
Thanks

[IRTrans]

No idea - I do not know CommandFusion at all.

IRTrans

[clmuller]

http://www.commandfusion.com/

[IRTrans]

Hi,
they have contacted us in the meantime.

They will integrate IRTrans support into their next SW release.

IRTrans

[clmuller]

Cool, thanks

[trikom]

I interesting to use commandfusion integrated with IrTrans. Please help me.
I have IrTrans wifi with dB. I send the following command:
Initialization: ASCI
Command: Asnd Sony, vol+
I write de dB, but don't work
Thank!
Trikom

[IRTrans]

Hi,
we would suggest to use UDP.

To do that just send "snd Sony, vol+" to UDP port 21000 of the IRTrans device.

Please make sure that the IR Codes have been uploaded. To check that you can send the IR Code via http (Browser -> IRTrans Ethernet manual).

IRTrans

[trikom]

Hi, in the UDP comunication is not necesary to send initialization "ASCI"
And the command to send is without "A"

Ex:

Command UDP:
send sony, vol+

Command TCP:
Asend sony, vol+

OK?

Thank!
Trikom

[IRTrans]

Hi,
yes, that is correct.

Using UDP you shall not send "ASCI" to start.

Furthermore no "A" in front of the command.

Please note that the command is "snd" or "Asnd" and not "send" or "Asend".

IRTrans