Hi,
I am using IRTrans PoE hardware v2.2 or later with an external high power transmitter. Sometimes, if the device to be controlled (a Velux skylight) is in bright sunshine the IR signal doesn't get recieved. The original skylight remote control, held in the same place as the IRTrans high power transmitter always works.
Perhaps I don't have the highest power setting for the external high power transmitter
I have the power jumper set to "upper output" (as per "IRTrans Transmitter_EN.pdf") (i.e. the jumper is on the pins closest to the Ethernet jack).
Which of the two stereo phone connectors should I be using for the highest power transmitter. The stereo phone jack closest to the Ethernet jack or the one furthest away?
Thanks