Page 1 of 1
IRT-TRANS-HPK
Posted:
Sat 18. Apr 2009, 11:17
by arcix
Do you have photos and tech specs of the high-power external emitters?
Re: IRT-TRANS-HPK
Posted:
Sat 18. Apr 2009, 15:26
by IRTrans
Currently I do not have a picture at hand.
Basically it is an IR Blaster consisting of four 5mm LEDs arranged in a 2x2 package being 1cm x 1cm in size.
IRTrans
Re: IRT-TRANS-HPK
Posted:
Fri 29. May 2009, 16:24
by arcix
IRTrans wrote:Currently I do not have a picture at hand.
Basically it is an IR Blaster consisting of four 5mm LEDs arranged in a 2x2 package being 1cm x 1cm in size.
IRTrans
The moment you have a picture, can you please post it?
Re: IRT-TRANS-HPK
Posted:
Fri 2. Mar 2012, 10:23
by v.shark
Same question. We are going to order some IrTrans ethernet devices with "IRT-TRANS" external transmitters. But I can not find any photo of the transmitter.
Re: IRT-TRANS-HPK
Posted:
Mon 24. Sep 2012, 12:36
by rmetrich
What is the jumper delivered with the transmitter for?
Re: IRT-TRANS-HPK
Posted:
Mon 24. Sep 2012, 13:11
by IRTrans
The jumper has to be set inside the IRTrans device to enable high power blasting via the external output.
There should be an instruction sheet together with the transmitter showing where to place the jumper.
IRTrans
Re: IRT-TRANS-HPK
Posted:
Mon 1. Oct 2012, 06:19
by kash123
hmmm nyce information but i can't see any photo of transmitter...
Re: IRT-TRANS-HPK
Posted:
Wed 29. Jan 2014, 10:02
by lourencohen
There are no pictures of high-power external emitters with me right now. But I remember I had lot of them saved in my home computer. When I go home this week end I will try getting them and I will post it here if I get the pictures.
________________________________________________________
Louren