IR Trans transforms your PC into a programmable remote control: It learns the codes of your remote control,
stores them in a database and sends them controlled by your applications.
Furthermore you can control your PC with almost any remote control.
Use the links above to get an overview of the diverse usage scenarios!
The IRTrans system undergoes a constant further development and extension.
Worldwide there are already more than 8,000 devices in use.
News
NEW: The IRTrans Support forum. You can reach via the "Support" Link in the top menubar.
IRTrans LAN Controller XL
The IRTrans with ethernet interface has got a builtin TCP/IP Stack and includes a webserver for configuration. The LAN interface allows an easy integration into existing ethernet networks. 128K of Flash memory allows to store user web pages inside the device. Furthermore
the LAN Controller has got an integrated IR database with 128KB.
It also has 8 IR Outputs with 3,5mm plugs and 4 Relay Outputs and an additional RS232 interface.
The connector for the IRTrans Serial bus allows to set up multizone systems.
Technical information Prices & Orders
IRTrans Ethernet PoE
IRTrans Ethernetmodule with power supply via a PoE (IEEE 802.3af) Switch. No power supply is needed and only the LAN Cable needs to be routed to the IRTrans box. Optionally available with integrated flash IR database and 2nd independent IR output. All other functions are identical with the standard IRTrans Ethernet modules.
Prices & Orders
Infrared <–> IP Gateway: All Ethernet based IRTrans Modules can be used as an IR <–> IP Gateway. This allows to transfer IR Commands via all kinds of IP based networks. Of course that can be done without any additional systems or software.
IRTrans LAN Controller. The IRTrans with ethernet interface has got a builtin TCP/IP Stack and includes a webserver for configuration.
The LAN interface allows an easy integration into existing ethernet networks.
The LAN Controller has got an integrated IR database with 128KB.
It also has 4 IR Outputs with 3,5mm plugs and 4 Relay Outputs
The connector for the IRTrans Serial bus allows to set up multizone systems.
Technical information Prices & Orders
IRTrans Ethernet. The IRTrans with ethernet interface has got a builtin TCP/IP Stack and includes a webserver for configuration.
The LAN interface allows an easy integration into existing ethernet networks. This module is also available with an integrated IR database. The IRTrans Ethernet is now also available with an iRed Mac License.
Technical information Prices & Orders
IRTrans Mediacontroller. The Mediacontroller is an IR controller for every system with RS232 interface.
It has got an integrated IR database with memory for around 1,000 IR Commands. When an IR command is received, programmable strings can be sent over the serial interface.
Sending of IR codes is also possible using simple ASCII commands. The IR codes can be referenced using their names.
Technical information Prices & Orders
New: Every IRTrans now also supports the Microsoft™ Mediacenter Edition Keyboard (with any Windows 2000 / XP)
New: Girder 4 plugin included in the software distribution (Windows installer in the Download section)
New: Support for the IRTrans Ethernet on the Mac using iRed.
Hardware
• Small device (72 x 50mm) in translucent blue case
• USB, RS232 or Ethernet interface
• Includes Infrared Transmitter and Receiver
• Powerful Transmitter: Range more than 15m
• Connector for external IR Transmitters
• 38.400 Baud 2 Wire Bus to connect up to 16 busses with 16 devices each over 50-100m for each bus
• LCD Module to display information in different rooms
• Powerful 16-64KB microcontroller send and receive IR independently of the CPU load of the PC
• Can receive and send almost any A/V IR code
• Special versions for 455kHz devices available (e.g. for B&O™)
• Sending of IRDA codes (e.g. for Pace STBs)
• Powersupply via the USB / RS232 interface of the PC (RS232 devices might need a small power supply)
• PowerOn Option: Integrated small relay to switch on any ATX PC (optional)
Software
• The software runs on Windows 2000/XP and LINUX
• On request there is a Mac version for the same price with the iRed Mac software available.
• USB driver for Windows and LINUX included
• GUI Client to learn and send IR codes
• ASCII Client for batch usage
• TCP/IP based Server allows to use the system in networks and over the internet
• Compatible with LIRC / WinLIRC Clients (e.g. VDR ...)
• Codes used in .ccf files for the Philips Pronto™ can be loaded into the irtrans IR database.
• The irserver includes an xAP Interface.
• Several clients can be connected to the server at the same time
• Application Software is OpenSource
• Active-X Plugin and .NET DLL included to write own programms
• Plugins for various applications: e.g. Girder, Meedio, Sceneo, myHTPC, HIP, Homeseer, MisterHouse, V8tech MMC
|
| Support | Downloads | Contacts 
